EEHA Installation & Maintenance

EEHA Installation & Maintenance

DURATION:
4 Days
Price:
$2,495 GST Exempt
Enrolment:

Enrol  online  or by completing an Enrolment Form

Outcomes :
A Statement of Attainment for Australian Units of Competency; Record of Achievement for NZ Unit Standard; Certificate of completion for IECEx units of competency
Prerequisite Competencies:
An Electrical Licence is required in order for a course participant to be issued with a Statement of Attainment for all units of competency. Please contact us to discuss and confirm your prerequisites

This course now delivers the IECEx pre-learning required for IECEx units Ex000, Ex001, Ex003, Ex004, Ex006, Ex007 and Ex008.

Upon successful completion of this course, students will graduate with acknowledgement that they have obtained the IECEx pre-learning required for these units.

Learn more about our IECEx training.

What this course delivers

Our EEHA Installation &  Maintenance course covers the following:Competency-Training_Nationally-Recognised-Training_100x82

  • Principles of hazardous area classification
  • Explosion-protection techniques
  • Equipment installation requirements
  • TestingIECEx-300x138
  • Procedures for breakdowns and maintenance
  • Theory and practical components
  • Visual and detailed inspections

Our comprehensive EEHA Installation &  Maintenance course Training offers participants the opportunity to obtain nationally recognised competencies that also meet the requirements of Australian/New Zealand Standard AS/NZS 4761.

This  4 day Installation and Maintenance of Electrical Equipment in Hazardous Areas course is derived from the latest UEE11 Electrotechnology Training package.

Competency Training’s facilities offer hazardous area inspection boards developed in conjunction with NHP. They cover the four most common explosion protection techniques used in industry, Intrinsically Safe (Ex i), Flameproof (Ex d) and Increased Safety (Ex e) for flammable gas environments and Protection by  Enclosure (Ex tD) for flammable dust environments. Students are required to carry out a detailed hazardous area  inspection on all pieces of equipment on each board looking for various faults.

The inspections focus on the specific installation requirements of each technique and each hazardous area  zone. The faults on the boards cover issues such as terminations, ingress protection, damage to  equipment, cable glanding, gland selection, cable requirements, labelling, certification, special conditions of  use and equipment suitability to name a few.

Who Should Attend

This course is designed for electrical workers, technicians and engineers involved with installing and maintaining electrical equipment in hazardous areas. In accordance with the AS/NZS 60079.14 requirement for continuing education, Competency Training recommends that this Hazardous Area training course is refreshed every 2-3 years.

How Do I Enrol?

Our training calendar is available as a PDF Document or online. Students can enrol directly online or by utilising the below enrolment forms.

Alternatively, please contact us on 1300 872 585 to discuss dates and enrolment options.

Course Pathway Options

This course forms part of the  UEE42611  Certificate IV – Hazardous Areas Electrical  and   Competency Training are  able  to offer participant the full Certificate IV via Recognition of Prior Learning (RPL) where a  kit is completed in your own time and with the assistance of our knowledgeable trainers and assessors.

On completion of this course, a Licensed Electrician is eligible to complete our Hazardous Areas Classification and Design Course and obtain a Statement of Attainment for all of the units.

An  EEHA I&M Refresher  course is also available and is recommended to be completed every two years for electrical workers and engineers who have  completed the below competencies delivered by our four day course.

Competency Outcomes: Australia

Australian Units of Competency
UEENEEM080A
Report on the Integrity of Explosion - Protected Equipment in Hazardous Areas
UEENEEM020A
Attend to Breakdowns in Hazardous Areas - Gas Atmospheres
UEENEEM021A
Attend to Breakdowns in Hazardous Areas - Dust Atmospheres
UEENEEM022A
Attend to Breakdowns in Hazardous Areas - Pressurisation
UEENEEM024A
Install Explosion-Protected Equipment and Wiring Systems - Gas Atmospheres
UEENEEM025A
Install Explosion-Protected Equipment and Wiring Systems - Dust Atmospheres
UEENEEM026A
Install Explosion-Protected Equipment and Wiring Systems - Pressurisation
UEENEEM028A
Maintain Equipment in Hazardous Areas - Gas Atmospheres
UEENEEM029A
Maintain Equipment in Hazardous Areas - Dust Atmospheres
UEENEEM030A
Maintain Equipment in Hazardous Areas - Pressurisation
UEENEEM039A
Conduct Testing of Hazardous Area Installations - Gas Atmospheres
UEENEEM040A
Conduct Testing of Hazardous Area Installations - Dust Atmospheres
UEENEEM041A
Conduct Testing of Hazardous Area Installations - Pressurisation
UEENEEM042A
Conduct Close Visual Inspection of Existing Hazardous Areas Installations
UEENEEM044A
Conduct Detailed Inspections of Hazardous Areas Installations - Gas Atmospheres
UEENEEM045A
Conduct Detailed Inspections of Hazardous Areas Installations - Dust Atmospheres
UEENEEM046A
Conduct Detailed Inspections of Hazardous Areas Installations - Pressurisation

Competency Outcomes: New Zealand

NZ Unit Standard
17054
Report on the integrity of explosion-protected electrical apparatus in explosive atmospheres
17059
Attend to breakdowns in explosive atmospheres
17056
Install explosion-protected electrical apparatus and wiring systems in hazardous areas
17058
Maintain apparatus in explosive atmospheres
17073
Conduct testing of electrical apparatus in explosive atmospheres installations
17074
Conduct visual inspection of existing explosive atmospheres installations
17075
Conduct detailed inspection of electrical apparatus installations in explosive atmospheres

Competency Outcomes: IECEx

IECEx Units of Competency
Ex000
Basic knowledge and awareness to enter a site that includes a classified hazardous area
Ex001
Apply basic principles of protection in explosive atmospheres
Ex003
Install explosion-protected equipment and wiring systems
Ex004
Maintain equipment in explosive atmospheres
Ex006
Test electrical installations in or associated with explosive atmospheres
Ex007
Perform visual and close inspection of electrical installations in or associated with explosive atmospheres
Ex008
Perform detailed inspection of electrical installations in or associated with explosive atmospheres
ENROL ONLINE TODAY
Join our mailing list for course updates:

Ask about EEHA Installation & Maintenance

captcha